Pipes, tubes & sheets / Manufacturer enquiry
Oshiya
Round pipes, square and rectangular tubes, and sheet requirements.
What to know
A make-specific requirement deserves the details.
Oshiya Metals publishes a range of round pipes, square and rectangular hollow sections, precision tubes, and HR and CR sheets. Round-pipe quotations should distinguish nominal bore from outside diameter; hollow-section enquiries need both outside dimensions and wall thickness. State the application and any required standard so unlike products are not compared as equivalents.
Include this in the enquiry
- Round, square or rectangular profile and outside dimensions
- Wall thickness, lengths and quantity
- Required standard, finish and intended application
Official product references
Oshiya product information
These summaries follow the manufacturer’s public product information. Where a source publishes dimensions, we share range limits without inferring every size-and-thickness combination. Some sources identify product types only. Add the exact size from your drawing or specification to the enquiry.
- MS Pipes
Round pipes: 21.7–219.1 mm OD and 0.8–8.0 mm wall thickness.
The published product page references IS 1239, IS 1161 and IS 3601. Specify OD, wall thickness, length and the required standard.
Source: Oshiya Metals product range
- Square & Rectangular Hollow Sections
Square: 15 × 15–180 × 180 mm; rectangular: 20 × 15–240 × 120 mm; wall 0.8–8.0 mm.
The published bounds do not establish every dimension/thickness combination. Include the profile, outside dimensions, wall and required standard.
Source: Oshiya Metals product range
- MS Plates & Sheets
Sheet and plate range: 400–2,500 mm width and 0.4–50 mm thickness.
The published range includes lengths from 500–12,000 mm or custom lengths. It does not establish every width/thickness/length combination; add the grade, finish and exact cut dimensions.
Source: Oshiya Metals product range
Related material pages
Specify the actual section.
The manufacturer range is not a live stock list. Product pages explain what sizes and quantities help us check.
- Material enquiryMS PipesRound tubes for railings, structures and general use.Sizing notes
- Material enquirySquare & Rectangular Hollow SectionsSHS and RHS tubes for clean, strong modern frames.Sizing notes
- Material enquiryMS Plates & SheetsFlat stock for base plates, gussets, covers and fabrication.Sizing notes
Quotation checklist
A good start is enough.
You can add the rest in the enquiry notes. We’ll confirm specifics with you.
Round, square or rectangular profile and outside dimensions
Wall thickness, lengths and quantity
Required standard, finish and intended application
Keep comparing requirements